Construction regulations for Zhonghao butyl tape

1. General Provisions

(1) This regulation applies to the sealing and waterproofing engineering of civil structure roofs and metal panel surfaces using Zhonghao butyl tape as supporting materials for waterproofing membrane bonding, metal profiled plate bonding, PC board bonding, etc.

(2) When designing or using adhesive tape, it should be done in accordance with relevant regulations or by referring to the usage standards of Zhonghao butyl tape.

2. General provisions

(1) Construction needs to be carried out within the temperature range of -15 ° C to 45 ° C (corresponding measures should be taken when exceeding the specified temperature range)

(2) The surface of the base layer must be cleaned or wiped clean, kept dry, and free of floating soil and oil stains.

(3) The bonding area must not be torn or peeled off within 24 hours after construction.

(4) Select different models, specifications, and sizes of Zhonghao butyl tape according to actual engineering needs.

(5) Place boxes at a distance of approximately 10cm from the ground, and do not stack more than 5 boxes.

3. Construction tools

Cleaning tools, scissors, rollers, wallpaper knives, etc.

4. Usage requirements

(1) The bonding surface is clean and free of oil stains, grey water, and water vapor.

(2) To ensure the bonding strength, the base surface temperature should be above 5 ° C, and special production can be carried out in specific low-temperature environments.

(3) When using, peel off the adhesive tape once before use.

(4) Do not use with waterproof materials containing organic substances such as benzene, methyl benzene, methanol, ethylene, silicone, etc.

5. Process characteristics

(1) Construction is convenient and fast. When using Zhonghao butyl tape for construction, it should be bonded in place at once and the surface of the base layer should be clean.

(2) The construction environment requires a wide range of requirements. Construction can be carried out normally when the ambient temperature is between -15 ° C and 45 ° C, and the humidity is below 80 ° C, demonstrating strong environmental adaptability.

(3) The repair process is simple and reliable. Just use Zhonghao single-sided butyl tape for the major water leakage area.